Myson Kickspace 800 Instrukcje Operacyjne Pobierz pdf (Strona 4)

4. WATER CONNECTIONS

4.1 Connect flexible pipes to the system flow and

return pipes.

Fig. 4.1 - Connect flexible pipes to system pipework

WATER CONNECTIONS - continued

System pipework

Flexible pipes

4.2 Connect the valve ends of the flexible pipes to

the rear of the Kickspace.

Note: The direction of flow arrows on the valves

are not significant in this application.

Fig. 4.2 - Connect the flexible pipes to the Kickspace

WATER CONNECTIONS - continued

4.3 Fill and vent the system. A vent screw is

provided to vent the Kickspace heat exchanger.

Close the vent and check for leaks.

Front view of unit

Fig. 4.3 - Vent screw position

Fig. 5.2 - Ensure 8 mm projection

5.1 Position the Kickspace under the cupboard in the

required location, with the front edge just behind

the line of the plinth.

Note: Ensure that the flexible pipes are not kinked and

that the electrical cord is not in contact with hot surfaces.

5. FITTING THE KICKSPACE

5.2 Replace the plinth and bring the Kickspace forward into the opening so that the front edge projects 8 mm through

the plinth.

FITTING THE KICKSPACE - continued

Fig. 5.1 - Position the Kickspace

Flexible pipes

Isolating valves

Air vent screw

Top view of unit

8 mm projection

1 2 3 4 5 6 7 8

Brak uwag

Myson Kickspace 800 Instrukcje Operacyjne Strona 4